Product details

1. The manufacturing process of stacker shuttle rackings is in accordance with JB/T5323-91. 
2. The tolerance of the hole spacing of the racking cubicles is ±2mm for the whole length of the cubicles, the limiting difference of ±2mm for the width of the cubicles, the deviation of the side faces of the cubicles and the curvature of the inner and outer curvatures of the cubicles is not greater than H/1000mm and ≤3mm, and the deviation of the verticality of the cubicles from the base plate is not greater than 0.5mm within the range of the high degree of 500millimeters. 
3. The profile size deviation of the welded seams of the shelves and the welded seams are in accordance with GBJ205. 
4. The surface of the racking surface spraying treatment is full and smooth, no difference in color, no shrinkage of the phenomenon of flower package. 
5. The installation, commissioning and inspection of the rackings are based on the national standard GB50205-2001 and the industrial standard JB/T5323-91.